News
Latests news
SMOPYC 2026 awards the INPERSO project for its robotic 3D façade printer
The Technical Innovation Awards at SMOPYC 2026 have recognised the robotic 3D printer developed within the INPERSO project in the category of “Research and Technological Development”, consolidating its position as one of the most notable innovations in the...
CARTIF renews ‘Merit’ accreditation reinforcing its leadership in the aerospace sector
CARTIF’s Analysis and Testing Laboratory (LAE) has once again secured the prestigious ‘Merit’ status awarded by Nadcap (National Aerospace and Defence Contractors Accreditation Program), a global accreditation scheme administered by the Performance Review Institute...
Badajoz strengthens the regions’s ability to adapt to climate change through the PRO-CLIMATE project
The CARTIF Technology Centre and the Badajoz Provincial Council held a bilateral workshop last week focused on promoting shared solutions related to behavioural change for climate adaption and rural revitalisation. The event, entitled “Climate Adaption and Regional...
BuildON drives automation and energy efficiency in social housing in Finland
The BuildON Project team has implemented a range of advanced solutions in social housing building in Helsinki, Finland, to optimise energy consumption and improve indoor comfort. Through these actions, the team has demonstrated how digitalisation and automation can...
WalNUT shapes the future of nutrient recycling at its final event
The WalNUT project will hold its final event on 5 February in Brussels. During the event, partners will discuss and analyse the latest results, the key knowledge gained throughout the project, and the future opportunities identified for nutrient recycling in Europe....
From linear to circular renovation: DTERBIM launches to drive energy-efficient and circular renovation across Europe
The consortium of DTERBIM (Driving Transformation on Energy-efficient and circular Renovation through BIM), a €3.83 million project funded under the European Union’s Horizon Europe programme, is proud to announce its official launch. This pioneering initiative aims to...
CARTIF and INOE sing agreement to advance cultural heritage conservation
The CARTIF Technology Centre and the National Institute of Research and Development of Optoelectronics (INOE 2000), a leading Europe institute in the field of optoelectronics based in Bucharest (Romania), have signed a framework agreement to strengthen their...
SMX And CARTIF Partner To Accelerate ‘Physical-To-Digital’ Circular-Economy Innovation Across Spain & Europe
SMX (Security Matters) PLC (“SMX”), the pioneer of molecular “physical-to-digital” marking for supply-chain transparency, and CARTIF, one of Spain’s leading non-profit technology research centres, have agreed on a framework to integrate SMX’s end-to-end tracing...
NATMed holds its sixth meeting in Greece to learn about the advances in water management in its Case Study
The European NATMed project consortium held its sixth regular meeting in Florina (Greece) from October 21 to 23, with the aim of sharing the lastest advances and learning about the advances of the Greece Case Study. During this meeting, the partners could exchange...
CARTIF builds a hybrid park for Smart Buildings and AI applied to hydrogen
The CARTIF Technology Centre has joined the EnergyGuard Testing & Experimentation Facility (TEF) to promote trustworthy artificial intelligence across the European energy value chain. Within the Horizon Europe framework, EnergyGuard brings together five...
CARTIF joins the FIWARE iHubs Network with the launch of CARTIFactory
The CARTIF technology center has launched CARTIFactory iHub, its new digital innovation pilot designed to provide companies and organizations with access to tools such as collaborative robotics, generative artificial intelligence (GenAI), digital twins, and industrial...
ORGANIC Project emerges to improve the recyclability of wind turbine blades through additive manufacturing
The ORGANIC European Project aims to combine nature structures and additive manufacturing to improve the future recyclability of products. Based on bio-intelligence, the initiative also seeks to enhance efficiency and sustainability in the industrial production...
European Commission approves two disruptive technologies within the framework of the Ruractive project
The Ruractive project has strengthen its commitment to rural innovation with a new milestone: the approval of two disruptive technologies presented by the consortium to the European Commission last May in Zamora (Spain). In an exceptional move, the European executive...
The Castilla and Leon Hydrogen Valley brings together experts and companies from the sector to analyse the take-off of green hydrogen in Spain
National experts and companies from the sector met today at the Fórum Evolución in Burgos in a conference open to the public to explain the Castilla and Leon Hydrogen Valley Project analyse the Spanish infrastructure and highlight several success stories of European...
s-X-AIPI Project shows AI advancements in industrial processes in its final event
The s-X-AIPI project, funded by the Horizon Europe program, will hold its final event on April 9, 2025, at the Sava Centar, with online participation available. This workshop will highlight how self-improving artificial intelligence (AI) is transforming process...
NATMed Project holds third co-design session in Spain to discuss use of the Spanish Case Study
The consortium of the NATMed project hold the last 11 February the third co-design session in the facilities of the Department of Agriculture, Fisheries, Water and Rural Development of Junta de Andalucía, in Sevilla (Spain). During this session, the partners discussed...
FertiCovery Project, launched to explore best available technologies for alternative fertilisers
The European FertiCovery project consortium held its kick-off meeting this week in Enschede (Netherlands) to launch its mission to advise policymakers and stakeholders on alternative fertilising products. The aim of the project is to ensure balance nitrogen and...
DRAGADOS and CARTIF win international recognition at the NCE Tunnelling Awards 2024 in London
The construction company DRAGADOS, with the technical collaboration of the CARTIF Technology Centre, has obtained international recognition in London by winning the prestigious New Civil Engineering Tunnelling Awards 2024 for the SOGUN system, a Guinte Robot Geometric...
The vertical garden of the URBAN GreenUP project returnos to the centre of Valladolid
Valladolid City Council and CaixaBank have announced a collaboration agreement to install part of the vertical garden of the URBAN GreenUP project on the façade of the bank’s building, located on Regalado Street, on the corner of Teresa Gil, in Valladolid. The...
CARTIF joins the Net-Pharma Hub as the first and only technology centre of the group
CARTIF technology centre has joined the Net-Pharma Hub, the leading European ecosystem dedicated to fostering innovation, collaboration and networking in the pharmaceutical industry. This alliance reinforces CARTIF’s commitment to technological excellence and applied...
The H-HYDROFLEX Project stands out at HYDRO 2024 with its innovative proposal for hybridisation in hydroelectric power plants
CARTIF participated last week in the International Conference HYDRO 2024, one of the most important events in the field of hydropower and renewable energy, which took place in Graz (Austria). Sergio Rodríguez Carro, researcher of the Energy division, was in charge of...
The consortium of the LIFE NEXUS project will meet on 26 November in León where they will highlight the sustainability of the water cycle.
The LIFE NEXUS project consortium brings to an end five years of research, development and innovation with a final event to share the most outstanding advances and results in mini-hydro generation within the urban water cycle. The meeting will take place on Tuesday 26...
SIRCULAR project holds its first General Assembly in CARTIF to boost the future of sustainable building
CARTIF technology centre, one of the partners of the project, holds the first General Assembly of the European SIRCULAR project on 13 and 14 November. During this meeting, some experts and collaborates met to move forward research on sustainable building solutions....
The Circular Economy project United Circles, led by CARTIF, starts up in Valladolid, seeking to reduce waste by favouring industrial and urban symbiosis
The United Circles project consortium met today at the San Agustín Cultural Centre in Valladolid to kick off one of the most ambitious proposals in the field of circular economy in Europe. This project, led by CARTF, arises from the need to reduce the generation of...
The SMARTeeSTORY Project analyses the latest advanced in energy efficiency of historic non-residential buildings
On 6 an 7 November, the CARTIF Technology Centre hosted the general monitoring meeting of the European SMARTeeSTORY project. During this meeting, the partners presented the latest advances of the project, as well as analysing the next steps to be taken in its roadmap...
FUSILLI Project holds its final conference in Turkey to discuss the key steps to transform the urban food system
The FUSILLI European Project comes to an end after four years of research how to transform the urban food system, and to celebrate it, the project consortium will meet the next 19 and 20 November in Nilüfer (Turkey) to celebrate its final conference. The event will be...
The NATMed Project holds its fourth regular meeting in Turkey to evaluate its Case Study
The NATMed project consortium has met 1st and 2nd October in Ténedos Island (Turkey) to hold its fourth regular meeting. During these days the partners have evaluated the overall progress of the project, and beside this, they have the opportunity to visit the Turkish...
The European SIRCULAR project aims to transform the construction sector through decarbonisation strategies
The European consortium met on 5 and 6 June in Genoa (Italy) to celebrate the launch of the SIRCULAR project. This initiative, which will last three and a half years, will seek to turn the construction sector around and move it towards a more circular and sustainable...
The European CLIMRES project aims to lead the retrofitting of climate-resilient buildings
The CLIMRES project consortium held its kick-off meeting on 4 and 5 June in Athens (Greece). This project, led by SingularLogic, arise from the need to change the course of the European housing stock and retrofit buildings to achieve climate resilience. During its...
The PHENOLEXA Project closes its three years of research on the development of a cascade biorefinery of agricultural secondary flows
The PHENOLEXA consortium met in full on May 15 and 16 at the CARTIF technology centre facilities to hold the last meeting of the project and thus recapitulate the results achieved after three years of research and development. This initiative arose with the aim of...
The MOBILITIES for EU project holds its second General Assembly in Dresden (Germany) coinciding with the IEE 6G Summit and the Neutralpath project
The MOBILITIES project consortium met this week in Dresden, Germany, to hold its second General Assembly and review the team’s first steps since its launch earlier this year. One of the main topics of the meeting has been the study of the situation of the Leading and...
The NATMed project holds its third regular meeting in Seville to evaluate the development of the Spanish Case Study
The NATMed project consortium has met this week at the Consejería de Agricultura, Pesca, Agua y Desarrollo Rural de la Junta de Andalucía, in Sevilla, to assess the progress of the project and, in particular, of the Spanish Case Study and the status of the...