CARTIF PROJECTS

INFIT

Keeping the safety of the entire rail network

Description

Keeping the safety of the entire rail network and, above all, critical elements such as tunnels, becomes a fundamental and priority objective for the Strategic Plan of Infrastructure and Transport (PEIT). For this, the potential causes of problems must be detected, usually cracks and fissures, and their growth must be controlled. Current evaluation systems are slow, subjective and unreliable.

In INFIT, automatic data capture systems have been developed to obtain an accurate and objective image of the tunnel surface. New tools have been developed that are capable of detecting, classifying and monitoring the cracks and fissures that may appear, as well as a system for the prevention of potential risks that may affect the integrity of tunnels, users and workers.

Objectives

    • The development of a new railway tunnel inspection system based on the integration of image acquisition devices and active lighting equipment capable of highlighting fissures or cracks.
    • The development of detection algorithms to facilitate the location and measurement of size and orientation of cracks and fissures that may jeopardize the integrity of the tunnel.
    • The implementation of monitoring tools that allow the evaluation of the growth of defects detected through analysis and comparison of successive periodic inspections.

     

    Actions

    • Analysis and specification of the technical requirements of the tools for inspection, detection and tracking of cracks and fissures.
    • Development of a crack inspection prototype, designing its architecture, synchronizing the acquisition devices and manufacturing the platform.
    • Technologies and methods of detection, measurement and tracking of fissures using image processing algorithms.
    • Integration, prototype validation and demonstration of the complete system in real environments.

    Expected results

    • An inspection system of 100% of the surface of the tunnel through the use of linear cameras with a resolution per pixel between 1- 0.25 mm2.
    • Crack detection algorithms for the location and determination of size and position of cracks and fissures.
    • Tracking tool that automatically, accurately and objectively evaluates the growth of the cracks detected by algorithms for comparing successive inspections and automatically generates monitoring reports.

    Partners:

    INNPACTO 2012

    INFIT: IPT-2012-0980-370000

    Presupuesto total: 620.006,75 €
    Contribución 206.289,70 €
    Duración: 24 meses: Octubre 2012 – Octubre 2014

    Responsible

    Roberto Medina Aparicio

    División de Sistemas Industriales y Digitales

    robmed@cartif.es

    Networking

    Cultural and natural heritage projects:

    Auto-DAN

    Auto-DAN

    The Auto-DAN project aims to enable homes and small businesses across the EU to optimize their energy consumption and provide and assessment of the live energy performance of a building. The solution will focus on the assistive role automation will have in buildings.

    read more
    LowUP

    LowUP

    LowUP will develop and demonstrate three new efficient heating and cooling technologies that will reduce CO2 emission and primary energy consumption. Heating and cooling account for 50% of the EU´s annual energy consumption.

    read more
    HySGRID+

    HySGRID+

    The objective of the Cervera HySGRID+ network is to strengthen the technological capacity of Spanish Technology Centres with a high level of complementarity and promote their solid cooperation with the ultimate aim of researching and developing new technological solutions that facilitate the creation of local energy positive balance communities (LEPC)

    read more
    Join the RURITAGE Photo Contest!

    Join the RURITAGE Photo Contest!

    Do you want to show the world what makes rural areas special? Then take part in the RURITAGE Photo Contest! It is a unique opportunity for local communities within the territories of RURITAGE to highlight the potential of their natural and cultural heritage. The Photo...

    read more
    CAPRI

    CAPRI

    Overall CAPRI objective is to develop, test and experiment an innovative cognitive automation platform (CAP) to achieve the digital transformation of the European process industry enabled by cognitive solutions that give operation flexibility to existing process industries

    read more
    Final Conference of REMOURBAN

    Final Conference of REMOURBAN

    Next Thursday, July 16, the final conference of the REMOURBAN project will take place and it will present the knowledge, experience and results collected throughout the 5 years of the technological work of this international...

    read more
    IOTEC Project, nominated for the RegioStars awards

    IOTEC Project, nominated for the RegioStars awards

    RegioStars Awards, organized by the European Commission, recognize each year the excellence of the most innovative regional projects on the continent, and in their 2020 edition they have selected the Spanish-Portuguese project IOTEC to compete for the award in the...

    read more
    EACC Val

    EACC Val

    EACC Val project aims to analyze the influence of climate change on the municipality of Valladolid, identifying climate risks and vulnerabilities and proposing actions that affect its future climate adptation.

    read more
    Pelletizing Pilot Plant

    Pelletizing Pilot Plant

    TECHNOLOGICAL OFFER Pelletizing Pilot PlantDescription The Pelletizing Pilot Plant can be operated with biofuels, other solid wastes and mixtures from them. The Plant has a capacity of 200 kg/h. The Plant has the following elements: Raw material conditioning system...

    read more
    Spray Drying Plant

    Spray Drying Plant

    TECHNOLOGICAL OFFER Spray Drying PlantDescription Spray Drying Plant includes: Feed tank and inlet juice atomizer NG burner and indirect hot gases generator Air disperser, drying chamber, suction fan and air register The plant can be operated with the following...

    read more
    Fermentation Equipment

    Fermentation Equipment

    TECHNOLOGICAL OFFER Fermentation EquipmentDescription The fermentation system has the following elements: Sterility bell Autoclave Nanodrop Thermocycler for PCR and real-time PCR Separate rooms to avoid cross contamination Refrigerators Analytical characterization...

    read more
    Extrusion Pilot Plant

    Extrusion Pilot Plant

    TECHNOLOGICAL OFFER Extrusion Pilot PlantDescription Extrusion Pilot Plant Clextral, with rotating twin-screw. The Plant can be operated in the following conditions: Feed water flow range: 4.5 – 11 kg/h Screw turning speed range: 600 – 1,000 rpm Process temperature...

    read more
    Glycolysis Plant

    Glycolysis Plant

    TECHNOLOGICAL OFFER Glycolysis PlantDescription Glycolysis Pilot Plant with a capacity of 50 L. The chemical degradation process is optimized for different plastic waste. The Plant is complemented by a glycolysis reactor with a capacity of 2 L. Applications Glycolysis...

    read more
    Pyrolysis Pilot Plant

    Pyrolysis Pilot Plant

    TECHNOLOGICAL OFFER Pyrolysis Pilot PlantDescription The process and fluid mechanics of Pyrolysis Pilot Plant are optimized to work with PE and carbon fiber composites (CFRP). The Plant has different analytical techniques: Gel Permeation Chromatography (GPC) Gas...

    read more
    Gasification Pilot Plant

    Gasification Pilot Plant

    TECHNOLOGICAL OFFER Gasification Pilot PlantDescription Pilot plant of gasification of biomass in a bubbling fluidized bed. The pilot plant has a capacity of 3-5 kg/h. It allows work temperature range up to 900 ºC. It allows the entry of different gasification gases...

    read more
    Recovery plant for recoverable extracts

    Recovery plant for recoverable extracts

    TECHNOLOGICAL OFFER Recovery plant for recoverable extractsDescription Pilot Plant for recovery of materials of interest in aqueous flows. The Plant is powered by solar energy and has the following equipment: Spray drying equipment with a capacity of 5 L / h: Maximum...

    read more
    Microfiltration Plant

    Microfiltration Plant

    TECHNOLOGICAL OFFER Microfiltration PlantDescription The plant has a 50 kDa hollow fiber membrane. Following conditions are able to be worked: Maximum pressure of 3 bar Temperature range: 5 – 55 ºC pH range: 1,5 – 13 Typical operating volumes: 100 L Applications Cold...

    read more
    Ultrafiltration Plant

    Ultrafiltration Plant

    TECHNOLOGICAL OFFER Ultrafiltration PlantDescription Depending on the membrane used, it can work under the following conditions: Maximum pressure: 3 bar Temperature range: 10 – 55 ºC PH range: 1,5 – 13 Applications Separation of high molecular weight components,...

    read more
    Membrane Filtration Plant

    Membrane Filtration Plant

    TECHNOLOGICAL OFFER Membrane Filtration PlantDescription Available technologies: Microfiltration (MF), Ultrafiltration (UF), Nanofiltration (NF) and Reverse Osmosis (OI) Pressure range: 4 - 64 bar Temperature range: 5 - 80ºC pH range: 2 – 12 Typical operating volumes:...

    read more
    Biodegradability testing

    Biodegradability testing

    TECHNOLOGICAL OFFER Biodegradability testingDescription The system is aimed to perform: Biodegradability Testing Methanogenic activity testing The determination of biogas production in continuous mode is allowed, with the possibility of remote viewing. Applications...

    read more
    Biogas Upgrading Pilot Plant

    Biogas Upgrading Pilot Plant

    TECHNOLOGICAL OFFER Biogas Upgrading Pilot PlantDescription The plant is consisting of a membrane contactor system for biomethane production by biogas upgrading. Up to 99,9% of the CO2 contained in the gas stream can be removed. Applications Biogas refining for...

    read more
    Crystallization Pilot Plant

    Crystallization Pilot Plant

    TECHNOLOGICAL OFFER Crystallization Pilot PlantDescription The plant is consisting of: 50 L crystallization tower. A concentric tube design for the production of struvite from digestate and other nutrient-rich waste effluents. Centrifuge. Applications Nutrient...

    read more
    Anaerobic digestion pilot plant in two phases

    Anaerobic digestion pilot plant in two phases

    TECHNOLOGICAL OFFER Anaerobic Digestion Pilot PlantDescription Self-designed anaerobic digestion pilot plant. The plant has a crushing and ultrasound pretreatment system. The plant includes: Hydrolysis / homogenization tank (500 L). Acidogenesis tank (100 L)....

    read more
    Agro-forestry Laboratory

    Agro-forestry Laboratory

    TECHNOLOGICAL OFFER Agro-forestry Laboratory Agro-forestry Laboratory offers: Comprehensive agricultural and forestry studies. Analysis and tests at laboratory, greenhouse and field levels. Personalized services for the agricultural sector, forestry and manufacturers...

    read more
    Water and Effluents Treatment Laboratory

    Water and Effluents Treatment Laboratory

    TECHNOLOGICAL OFFER Water and Effluents Treatment LaboratorySectors of interest Food: Processing and sterilization of products. Clarification of beverages and purification of drinking water. Industrial Processes: Effluent treatment and process water purification....

    read more
    Environment Laboratory

    Environment Laboratory

    TECHNOLOGICAL OFFER Environment LaboratoryBiodegradability studies of organic residues under anaerobic conditions Analysis of methanogenic potential and biogas characterization (%CH4, %CO2, %O2, %N2, %H2S) Characterization of residues and optimization of mixtures for...

    read more
    NBS Lab – Nature-based Solutions

    NBS Lab – Nature-based Solutions

    TECHNOLOGICAL OFFER NBS Lab – Nature-based SolutionsDescription CARTIF has provided the neccesary infrastructures for the creation of Nature-based Solutions Lab, where variables of different pilots are studied and modified, obtaining direct results from all of them....

    read more
    Share This